Product Description
SA…TK Series Rod Ends is belong to maintenance-free Rod Ends bearing. The rod end body is equipped with a left-hand or right-hand external thread. The rod end body is formed by extrusion and the surface of the rod end body is galvanized. And The outer sphere is lined with PTFE synthetic material.
PRODUCTS CATALOGUE
Part No: | Dimension | Load Rating(KN) | Weight | |||||||||||
d | B | dk | C1 | d2 | G | h | L1 | L2 | R1S | a | Cr | Cor | g | |
SA5T/K | 5 | 8 | 11.11 | 6 | 18 | M5X0.8 | 33 | 19 | 42 | 0.3 | 13 | 5.7 | 6 | 13 |
SA6T/K | 6 | 9 | 12.7 | 6.75 | 20 | M6X1.0 | 36 | 21 | 46 | 0.3 | 13 | 7.2 | 7.65 | 20 |
SA8T/K | 8 | 12 | 15.875 | 9 | 24 | M8X1.25 | 42 | 25 | 54 | 0.3 | 14 | 11.6 | 12.9 | 38 |
SA10T/K | 10 | 14 | 19.05 | 10.5 | 28 | M10X1.5 | 48 | 28 | 62 | 0.3 | 13 | 14.5 | 18 | 55 |
SA12T/K | 12 | 16 | 22.225 | 12 | 32 | M12X1.75 | 54 | 32 | 70 | 0.3 | 13 | 17 | 24 | 85 |
SA14T/K | 14 | 19 | 25.4 | 13.5 | 38 | M14X2.0 | 60 | 36 | 78 | 0.3 | 16 | 24 | 31 | 140 |
SA16T/K | 16 | 21 | 8.575 | 15 | 42 | M16X2.0 | 66 | 37 | 87 | 0.3 | 15 | 28.5 | 39 | 210 |
SA18T/K | 18 | 23 | 31.75 | 16.5 | 46 | M18X1.5 | 72 | 41 | 94 | 0.3 | 15 | 42.5 | 47.5 | 290 |
SA20T/K | 20 | 25 | 34.925 | 18 | 50 | M20X1.5 | 78 | 45 | 103 | 0.3 | 14 | 42.5 | 57 | 380 |
SA22T/K | 22 | 28 | 38.1 | 20 | 54 | M22X1.5 | 84 | 48 | 111 | 0.3 | 15 | 57 | 68 | 480 |
SA25T/K | 25 | 31 | 42.85 | 22 | 60 | M24X2 | 94 | 55 | 124 | 0.3 | 15 | 68 | 85 | 640 |
SA28T/K | 28 | 35 | 47.6 | 24 | 66 | M27X2 | 103 | 62 | 136 | 0.3 | 15 | 86 | 107 | 800 |
SA30T/K | 30 | 37 | 50.8 | 25 | 71 | M30X2 | 110 | 66 | 145 | 0.3 | 17 | 88 | 114 | 1100 |
SA35TK | 35 | 43 | 57.1 | 28 | 81 | M36X3 | 140 | 85 | 180.5 | 0.3 | 16 | 1640 |
SA…PK Series
Part No: | Dimension | Torque Kgf/cm | Load Rating(KN) | Weight | |||||||||||
d | d1 | B | a | C1 | d2 | G | h1 | L4 | L3 | Cr | Cor | g | |||
SA3PK | NOS-3 | 3 | 6.8 | 6 | 11 | 4.5 | 12 | M3x0.5 | 27 | 33 | 15 | 0.2~3.5 | 6 | ||
SA4PK | NOS-4 | 4 | 7.6 | 7 | 12 | 5.3 | 14 | M4x0.7 | 30 | 37 | 17 | 0.2~3.5 | 10 | ||
SA5PK | NOS-5 | 5 | 7.7 | 8 | 12 | 6 | 16 | M5x0.8 | 33 | 41 | 20 | 0.2~3.5 | 5.7 | 6 | 12 |
SA6PK | NOS-6 | 6 | 9 | 9 | 10 | 6.8 | 18 | M6x1 | 36 | 45 | 22 | 0.2~3.5 | 7.2 | 7.65 | 19 |
SA8PK | NOS-8 | 8 | 10.4 | 12 | 12 | 9 | 22 | M8x1.25 | 42 | 53 | 25 | 0.2~3.5 | 11.6 | 12.9 | 32 |
SA10PK | NOS-10 | 10 | 12.9 | 14 | 12 | 10.5 | 26 | M10x1.5 | 48 | 61 | 29 | 0.2~3.5 | 14.5 | 18 | 54 |
SA12PK | NOS-12 | 12 | 15.4 | 16 | 12 | 12 | 30 | M12x1.75 | 54 | 69 | 33 | 0.2~3.5 | 17 | 24 | 85 |
SA14PK | NOS-14 | 14 | 16.9 | 19 | 14 | 13.5 | 34 | M14x2 | 60 | 77 | 36 | 0.2~3.5 | 24 | 31 | 126 |
SA16PK | NOS-16 | 16 | 19.4 | 21 | 13 | 15 | 38 | M16x2 | 66 | 85 | 40 | 0.2~3.5 | 28.5 | 39 | 185 |
SA18PK | NOS-18 | 18 | 21.9 | 23 | 14 | 17 | 42 | M18x1.5 | 72 | 93 | 44 | 0.2~3.5 | 42.5 | 47.5 | 258 |
SA20PK | NOS-20 | 20 | 24.4 | 25 | 12 | 18 | 46 | M20x1.5 | 78 | 101 | 47 | 0.2~3.5 | 42.5 | 57 | 340 |
SA22PK | NOS-22 | 22 | 25.8 | 28 | 13 | 20 | 50 | M22x1.5 | 84 | 109 | 51 | 0.2~3.5 | 57 | 68 | 435 |
SA25PK | NOS-25 | 25 | 29.6 | 31 | 14 | 22 | 56 | M24x2 | 94 | 122 | 57 | 0.2~3.5 | 68 | 85 | 730 |
SA28PK | NOS-28 | 28 | 32.3 | 35 | 16 | 26 | 66 | M27x2 | 110 | 143 | 66 | 0.2~3.5 | 1000 | ||
SA30PK | NOS-30 | 30 | 34.8 | 37 | 16 | 26 | 66 | M30x2 | 110 | 143 | 66 | 0.2~3.5 | 1320 |
OUR WORKSHOP
OUR FACTORY
PACKAGING
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: | Single Row |
---|---|
Structure: | Rod End |
Material: | Bearing Steel |
Samples: |
US$ 8/Set
1 Set(Min.Order) | Order Sample |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Recent Advancements in Rod End Bearing Technology
Advancements in rod end bearing technology have led to improved performance and durability. Here are some insights into recent developments:
1. Enhanced Materials: Manufacturers are using advanced materials, including high-strength alloys and composites, to create rod end bearings that offer increased load-carrying capacity and improved corrosion resistance. These materials contribute to longer bearing life and better performance in challenging environments.
2. Sealing and Shielding: Innovations in sealing and shielding technologies have improved the protection of rod end bearings from contaminants, moisture, and harsh environmental conditions. These advancements extend maintenance intervals and increase bearing reliability.
3. Lubrication: Self-lubricating rod end bearings have become more prevalent, reducing the need for frequent manual lubrication. These bearings are designed to provide consistent and long-lasting lubrication, resulting in reduced maintenance requirements and longer service life.
4. 3D Modeling and Simulation: Manufacturers are increasingly using 3D modeling and simulation techniques to optimize rod end bearing designs. This allows for the creation of bearings that can handle higher loads and offer superior wear resistance while maintaining compact dimensions.
5. Customization: The ability to customize rod end bearings to specific application requirements has improved. This includes options for different thread types, materials, and sizes. Customization ensures that the bearing can meet the exact needs of the equipment it serves.
6. Environmental Sustainability: Some recent advancements focus on producing rod end bearings in an environmentally sustainable manner. Manufacturers are exploring eco-friendly materials and production processes to reduce the environmental impact of bearing manufacturing.
7. IoT Integration: In industrial applications, the integration of Internet of Things (IoT) technology allows for real-time monitoring and predictive maintenance of rod end bearings. Sensors and data analytics help detect early signs of wear or damage, optimizing maintenance schedules and minimizing downtime.
These recent advancements in rod end bearing technology have collectively improved the reliability, durability, and performance of these components in various mechanical systems. As technology continues to evolve, rod end bearings are expected to play an even more critical role in enhancing the efficiency and longevity of machinery and equipment.
Challenges and Solutions in Managing Load and Misalignment in Rod End Bearings
Rod end bearings often face challenges related to load capacity and misalignment in various applications. Here are the common challenges and solutions:
1. Radial and Axial Loads:
Challenge: Rod end bearings need to handle both radial and axial loads simultaneously in many applications.
Solution: Select rod end bearings with appropriate load ratings and materials to ensure they can withstand the expected loads. Also, proper maintenance and lubrication are essential for maximizing load-carrying capacity.
2. Misalignment:
Challenge: Misalignment can cause premature wear and reduced bearing lifespan.
Solution: Use self-aligning rod end bearings or incorporate spherical plain bearings to compensate for misalignment. Regular inspection and maintenance to correct any alignment issues are crucial.
3. Corrosion and Contaminants:
Challenge: Exposure to moisture, chemicals, and contaminants can lead to corrosion and damage.
Solution: Choose rod end bearings with suitable protective coatings or seals, such as PTFE liners or rubber boots, to prevent contaminants from entering. Stainless steel bearings offer enhanced corrosion resistance.
4. Lubrication:
Challenge: Inadequate lubrication can result in increased friction, overheating, and premature failure.
Solution: Follow the manufacturer’s lubrication recommendations and maintenance schedules. Proper lubrication ensures smooth operation and extends bearing life.
5. Shock and Impact Loads:
Challenge: Applications with frequent shock and impact loads can subject rod end bearings to excessive stress.
Solution: Choose rod end bearings with robust construction and materials to withstand shock loads. Regular inspections are necessary to detect early signs of damage.
By addressing these challenges with appropriate solutions, rod end bearings can perform optimally and provide long-lasting service in a wide range of applications.
Factors to Consider When Selecting a Rod End Bearing for a Specific Application
Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:
1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.
2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.
3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.
4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.
5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.
6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.
7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.
8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.
9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.
10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.
By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.
editor by CX 2024-05-14
China factory Ball Joint Phs POS Female Male Joint Threaded British System Rod End Bearing Spherical Plain Bearing with Best Sales
Product Description
Product Description
Product Parameters
Product application
FAQ
Q: Where to find Other bearings ?
Discover the Homepage—–> Products
Q: HOW TO CHOOSE A BEARING?
To properly choose a ball bearing, the important thing is to take into account several parameters:
1. Its application
Bearings are everywhere and therefore their applications are varied:
- – Agriculture
Do you prefer that we remind you ?
Immediate and free call/email back
2nd step: the outside diameter of the bearing
- A / Put your bearing on the grid as shown in the diagram.
- B / Mark the outline of the outer ring. For more convenience, use a pencil with a fine point.
- C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.
3rd step: the thickness of the bearing
- A / In the same way as for the outer diameter and the bore, place your bearing on the edge on the grid as shown in the diagram.
- B / Draw the outer contour.
- C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.
Conclusion :
You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness.
You can postpone these measurements in our bearing search tool on our website
You search, we find !
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: Single Row Structure: Rod End Material: Bearing Steel and Stainless Steel Load Direction: Thrust Spherical Plain Bearing Add Lubricant: Non Self-lubricating Outer Structure: Normal Samples: US$ 1/Piece
1 Piece(Min.Order)|
Request SampleCustomization: Available|
Customized Request
Recent Advancements in Rod End Bearing Technology
Advancements in rod end bearing technology have led to improved performance and durability. Here are some insights into recent developments:
1. Enhanced Materials: Manufacturers are using advanced materials, including high-strength alloys and composites, to create rod end bearings that offer increased load-carrying capacity and improved corrosion resistance. These materials contribute to longer bearing life and better performance in challenging environments.
2. Sealing and Shielding: Innovations in sealing and shielding technologies have improved the protection of rod end bearings from contaminants, moisture, and harsh environmental conditions. These advancements extend maintenance intervals and increase bearing reliability.
3. Lubrication: Self-lubricating rod end bearings have become more prevalent, reducing the need for frequent manual lubrication. These bearings are designed to provide consistent and long-lasting lubrication, resulting in reduced maintenance requirements and longer service life.
4. 3D Modeling and Simulation: Manufacturers are increasingly using 3D modeling and simulation techniques to optimize rod end bearing designs. This allows for the creation of bearings that can handle higher loads and offer superior wear resistance while maintaining compact dimensions.
5. Customization: The ability to customize rod end bearings to specific application requirements has improved. This includes options for different thread types, materials, and sizes. Customization ensures that the bearing can meet the exact needs of the equipment it serves.
6. Environmental Sustainability: Some recent advancements focus on producing rod end bearings in an environmentally sustainable manner. Manufacturers are exploring eco-friendly materials and production processes to reduce the environmental impact of bearing manufacturing.
7. IoT Integration: In industrial applications, the integration of Internet of Things (IoT) technology allows for real-time monitoring and predictive maintenance of rod end bearings. Sensors and data analytics help detect early signs of wear or damage, optimizing maintenance schedules and minimizing downtime.
These recent advancements in rod end bearing technology have collectively improved the reliability, durability, and performance of these components in various mechanical systems. As technology continues to evolve, rod end bearings are expected to play an even more critical role in enhancing the efficiency and longevity of machinery and equipment.
Challenges and Solutions in Managing Load and Misalignment in Rod End Bearings
Rod end bearings often face challenges related to load capacity and misalignment in various applications. Here are the common challenges and solutions:
1. Radial and Axial Loads:
Challenge: Rod end bearings need to handle both radial and axial loads simultaneously in many applications.
Solution: Select rod end bearings with appropriate load ratings and materials to ensure they can withstand the expected loads. Also, proper maintenance and lubrication are essential for maximizing load-carrying capacity.
2. Misalignment:
Challenge: Misalignment can cause premature wear and reduced bearing lifespan.
Solution: Use self-aligning rod end bearings or incorporate spherical plain bearings to compensate for misalignment. Regular inspection and maintenance to correct any alignment issues are crucial.
3. Corrosion and Contaminants:
Challenge: Exposure to moisture, chemicals, and contaminants can lead to corrosion and damage.
Solution: Choose rod end bearings with suitable protective coatings or seals, such as PTFE liners or rubber boots, to prevent contaminants from entering. Stainless steel bearings offer enhanced corrosion resistance.
4. Lubrication:
Challenge: Inadequate lubrication can result in increased friction, overheating, and premature failure.
Solution: Follow the manufacturer’s lubrication recommendations and maintenance schedules. Proper lubrication ensures smooth operation and extends bearing life.
5. Shock and Impact Loads:
Challenge: Applications with frequent shock and impact loads can subject rod end bearings to excessive stress.
Solution: Choose rod end bearings with robust construction and materials to withstand shock loads. Regular inspections are necessary to detect early signs of damage.
By addressing these challenges with appropriate solutions, rod end bearings can perform optimally and provide long-lasting service in a wide range of applications.
Design Principles and Functions of Rod End Bearings
Rod end bearings, also known as heim joints or rose joints, are essential components in various mechanical applications, where articulation and precise control of movement are required. These bearings are designed with specific principles and functions in mind:
Design Principles:
Rod end bearings consist of a spherical plain bearing, also known as a spherical plain bushing, within a housing. The design principles are as follows:
- Spherical Plain Bearing: The heart of a rod end bearing is a spherical plain bearing. This bearing allows the inner ring to tilt and rotate in multiple directions. It consists of an inner and outer ring with a sliding layer of material in between, often made from self-lubricating materials.
- Housing: The spherical plain bearing is housed within a protective casing, typically made of metal or other durable materials. The housing provides structural support and retains the bearing components.
- Threaded Shank: The outer part of the housing is often shaped as a threaded shank, allowing for easy attachment to various mechanical components, such as linkages or control arms.
- Lubrication Fittings: Many rod end bearings have provisions for lubrication fittings to ensure smooth articulation and reduce friction.
Functions:
Rod end bearings serve several crucial functions in mechanical systems:
- Articulation: Rod end bearings provide articulation, enabling components to pivot, swivel, and move in multiple directions. This function is vital in applications requiring flexibility and control over movement.
- Angular Misalignment Compensation: They can compensate for both static and dynamic angular misalignment. This is particularly useful in situations where components may not align perfectly due to varying factors like vibration or assembly tolerances.
- Load Transmission: Rod end bearings can transmit static and dynamic loads, making them suitable for applications involving force or load transfer. They are used in machinery and equipment where precise control of loads is essential.
- Precision Movement: These bearings provide precise control and movement, making them suitable for applications where accurate positioning of mechanical components is critical. This includes industries like aerospace and robotics.
- Corrosion Resistance: Many rod end bearings are designed with corrosion-resistant materials or coatings, making them suitable for use in harsh environments, such as marine and industrial settings.
- Durability: Rod end bearings are engineered for durability, allowing them to withstand challenging conditions and heavy-duty use. This ensures their reliability and longevity in demanding applications.
- Versatility: Rod end bearings are versatile components used across various industries, including automotive, aerospace, industrial machinery, and marine applications. Their adaptability and reliability make them valuable to engineers and designers.
These design principles and functions of rod end bearings make them indispensable in a wide range of mechanical systems where articulation, load-bearing capacity, and precise control are required.
editor by CX 2024-04-24
China Standard Female Si28t/K Phsa 28 Left Hand Ball Joint Metric Threaded Rod End Bearing Si30tk Phsa 30 for Rod Linkage End Bearing with high quality
Product Description
Female SI28T/K PHSA 28 Left Hand Ball Joint Metric Threaded Rod End Bearing SI30TK PHSA 30 for Rod Linkage End Bearing
Cylindrical Roller Bearings
|
Spherical Roller Bearings |
Needle Roller Bearings |
Tapered Roller Bearings
|
Crossed Slewing bearing | Thrust Roller Bearings |
Male rod ends are available in both left and right-hand configurations, featuring steel on steel contact surfaces. Rod ends with bore diameters ranging from 6mm to 12mm do not have a relubrication facility due to their load ratings. However, they can be relubricated on the side of the ball when rotated.
On the other hand, rod ends with bore diameters of 15mm and above do come with a relubrication facility.
Rod ends are capable of supporting radial forces in both tensile and compressive directions, facilitating the transmission of motions and forces with minimal movement. They are particularly suitable for applications involving alternating radial loads and, under specific conditions, unilateral loads. The eye housing’s thin wall design allows for compact adjacent constructions.
These rod ends can operate within a temperature range of -60°C to +200°C. It should be noted that for temperatures below 0°C, a reduction in load-carrying capacity must be considered. As these rod ends require lubrication, regular maintenance is necessary.
Detailed Photos
Products Details
More Products
Packaging & Shipping
Packaging | |
1)Commercial Bearings packaging: 1pc/plastic bag + color box + carton + pallet | |
2)Industrial Bearings packaging | |
3)According to the requirement of customers | |
Payment | |
1) T/T:30% deposit, 70% should be paid before shipment. | |
2) L/C at sight. (high bank charge, not suggested, but acceptable ) | |
3) 100% Western Union in advance. (especially for air shipment or small amounts) | |
Delivery | |
1) Less than 45 KGS, we will send by express. ( Door to Door, Convenient ) | |
2) Between 45 – 200 KGS, we will send by air transport. ( Fastest and safest, but expensive ) | |
3) More than 200 KGS, we will send by sea. ( Cheapest, but long time ) |
Our Advantages
1. FREE SAMPLES: contact us by email or trade manager, and we will send the free samples according to your request.
2. World-Class Bearing: We provide our customers with all types of bearings of world-class quality.
3. OEM or Non-Stand Bearings: Any requirement for Non-standard bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry.
4. Genuine products With Excellent Quality: Company has always proved the 100% quality products it provides with genuine intent.
5. After-Sales Service and Technical Assistance: Company provides after-sales service and technical assistance as per the customer’s requirements and needs.
6. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
7. Cost Saving: We provide long-life, shock-resistant, and high-reliability bearings with excellent quality and better performance. Resulting in increased cost savings.
8. Attending customer queries promptly: We believe that if customers are satisfied then it proves our worth well. Customers are always given quick support.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: | Without Roller and Ball |
---|---|
Structure: | Rod End |
Material: | Bearing Steel |
Load Direction: | Thrust Spherical Plain Bearing |
Add Lubricant: | Self-lubricating |
Outer Structure: | Outer Ring of Single-Slit |
Customization: |
Available
| Customized Request |
---|
Improving Aircraft Functionality with Rod End Bearings
Rod end bearings play a critical role in enhancing the functionality and safety of various aircraft components, including control surfaces and landing gear. Here’s how:
Aircraft Control Surfaces:
Rod end bearings are commonly used in aircraft control systems to connect control surfaces, such as ailerons, elevators, and rudders, to control cables or rods. These bearings provide several key benefits:
- Articulation: Rod end bearings offer articulation capabilities, allowing control surfaces to move smoothly and precisely. This flexibility is essential for pilots to control the aircraft’s attitude, roll, pitch, and yaw.
- Misalignment Compensation: Aircraft structures experience various forces and vibrations during flight. Rod end bearings accommodate misalignment, ensuring that control systems remain effective even under dynamic conditions.
- Durability: Aircraft operate in challenging environments, and rod end bearings are designed to withstand extreme temperatures, vibrations, and mechanical stress. Their robust construction contributes to the longevity and reliability of control systems.
- Weight Savings: Aircraft design prioritizes weight reduction. Rod end bearings, typically made from lightweight materials like high-strength alloys or composites, help minimize the overall weight of the aircraft.
Landing Gear:
Rod end bearings are also utilized in landing gear systems, which are critical for safe takeoffs, landings, and ground operations. Their contributions include:
- Shock Absorption: Landing gear components, including rod end bearings, play a role in shock absorption during landing, reducing the impact forces transmitted to the aircraft’s structure and passengers.
- Articulation for Retraction and Extension: Rod end bearings enable the controlled movement of landing gear components, allowing for smooth retraction and extension. This is crucial for aerodynamic efficiency and safety.
- Structural Integrity: Rod end bearings help maintain the structural integrity of the landing gear assembly, ensuring that it can support the aircraft’s weight during ground operations.
Overall, rod end bearings in aircraft applications contribute to the precise control, safety, and structural reliability necessary for aviation. Their ability to handle articulation, misalignment, and challenging operating conditions makes them indispensable components in the aerospace industry.
Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems
Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:
1. Steering Systems:
Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.
2. Suspension Systems:
In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.
3. Throttle and Accelerator Linkages:
Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.
4. Gear Shift Linkages:
In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.
5. Convertible Roof Mechanisms:
In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.
Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.
Factors to Consider When Selecting a Rod End Bearing for a Specific Application
Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:
1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.
2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.
3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.
4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.
5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.
6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.
7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.
8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.
9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.
10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.
By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.
editor by CX 2024-03-24
China wholesaler Self – Lubricating External Threaded Rod End Joint Bearing, Knuckle Bearing with Good quality
Product Description
Self – Lubricating External Threaded Rod End Joint Bearing, knuckle bearing
Radial spherical plain bearing
GEBJ 5 | GE 6 E | GEG 6 E | GE 6 C | GEG 6 C | PB 5 | COM 3 | ||
GEBJ 6 | GE 8 E | GEG 8 E | GE 8 C | GEG 8 C | PB 6 | COM 4 | ||
GBEJ 8 | GE10E | GEG10E | GE10C | GEG10C | PB 8 | COM 5 | ||
GEBJ10 | GE12E | GEG12E | GE 12 LO | GE12C | GEG12C | PB10 | COM 6 | |
GEBJ12 | GE15ES♥ | GEG15ES♥ | GE15C | GEG15C | PB12 | COM 7 | GE 15ET 2RS | |
GEBJ14 | GE16ES♥ | GEG16ES♥ | GE 16 LO | PB14 | COM 8 | |||
GEBJ16 | GE17ES♥ | GEG17ES♥ | GE 20 LO | GE17C | GEG17C | PB16 | COM 9 | GE 17ET 2RS |
GEBJ18 | GE20ES♥ | GEG20ES♥ | GE 25 LO | GE20C | GEG20C | PB18 | COM10 | GE 20ET 2RS |
GEBJ20 | GE25ES♥ | GEG25ES♥ | GE 30 LO | GE25C | GEG20C | PB20 | COM12 | GE 25ET 2RS |
GEBJ22 | GE30ES♥ | GEG30ES♥ | GE 32 LO | GE30C | GEG30C | PB22 | COM14 | GE 30ET 2RS |
GEBJ25 | GE35ES♥ | GEG35ES♥ | GE 35 LO | PB25 | COM16 | GE 35ET 2RS | ||
GEBJ30 | GE40ES♥ | GEG40ES♥ | GE 40 LO | PB28 | HCOM16 | GE 40ET 2RS | ||
GE45ES♥ | GEG45ES♥ | GE 50 LO | PB30 | HCOM19 | GE 45ET 2RS | |||
GE50ES♥ | GEG50ES♥ | GE 60 LO | HCOM20 | GE 50ET 2RS | ||||
GE60ES♥ | GEG60ES♥ | GE 63 LO | HCOM24 | GE 60ET 2RS | ||||
GE70ES♥ | GEG70ES♥ | GE 70 LO | HCOM28 | GE 70ET 2RS | ||||
GE80ES♥ | GEG80ES♥ | GE 80 LO | HCOM30 | GE 80ET 2RS |
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: | Single Row |
---|---|
Structure: | To The Heart |
Material: | Bearing Steel |
Load Direction: | Radial Spherical Plain Bearing |
Add Lubricant: | Self-lubricating |
Rod End: | General |
Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Recent Advancements in Rod End Bearing Technology
Advancements in rod end bearing technology have led to improved performance and durability. Here are some insights into recent developments:
1. Enhanced Materials: Manufacturers are using advanced materials, including high-strength alloys and composites, to create rod end bearings that offer increased load-carrying capacity and improved corrosion resistance. These materials contribute to longer bearing life and better performance in challenging environments.
2. Sealing and Shielding: Innovations in sealing and shielding technologies have improved the protection of rod end bearings from contaminants, moisture, and harsh environmental conditions. These advancements extend maintenance intervals and increase bearing reliability.
3. Lubrication: Self-lubricating rod end bearings have become more prevalent, reducing the need for frequent manual lubrication. These bearings are designed to provide consistent and long-lasting lubrication, resulting in reduced maintenance requirements and longer service life.
4. 3D Modeling and Simulation: Manufacturers are increasingly using 3D modeling and simulation techniques to optimize rod end bearing designs. This allows for the creation of bearings that can handle higher loads and offer superior wear resistance while maintaining compact dimensions.
5. Customization: The ability to customize rod end bearings to specific application requirements has improved. This includes options for different thread types, materials, and sizes. Customization ensures that the bearing can meet the exact needs of the equipment it serves.
6. Environmental Sustainability: Some recent advancements focus on producing rod end bearings in an environmentally sustainable manner. Manufacturers are exploring eco-friendly materials and production processes to reduce the environmental impact of bearing manufacturing.
7. IoT Integration: In industrial applications, the integration of Internet of Things (IoT) technology allows for real-time monitoring and predictive maintenance of rod end bearings. Sensors and data analytics help detect early signs of wear or damage, optimizing maintenance schedules and minimizing downtime.
These recent advancements in rod end bearing technology have collectively improved the reliability, durability, and performance of these components in various mechanical systems. As technology continues to evolve, rod end bearings are expected to play an even more critical role in enhancing the efficiency and longevity of machinery and equipment.
Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems
Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:
1. Steering Systems:
Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.
2. Suspension Systems:
In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.
3. Throttle and Accelerator Linkages:
Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.
4. Gear Shift Linkages:
In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.
5. Convertible Roof Mechanisms:
In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.
Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.
Factors to Consider When Selecting a Rod End Bearing for a Specific Application
Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:
1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.
2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.
3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.
4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.
5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.
6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.
7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.
8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.
9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.
10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.
By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.
editor by CX 2024-01-30