Tag Archives: high bearing

China supplier Rod End Bearing Ge90es GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality for Engineering Hydraulic Cylinders bearing block

Product Description

Rod End Bearing GE90ES GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality for Engineering hydraulic cylinders
The basic type of plain bearing is composed of inner and outer rings with spherical sliding spherical contact surface. The plain bearing is mainly composed of an inner ring with outer sphere and an outer ring with inner sphere, which can bear large load. According to its different types and structures, it can bear radial load, axial load or combined radial and axial load at the same time.
Self lubricating joint auxiliary bearing is used in water conservancy, professional machinery and other industries. Because the spherical sliding contact area of the joint bearing is large and the inclination angle is large, but also because most joint bearings adopt special process treatment methods, such as surface phosphating, galvanizing, chromium plating or outer sliding surface lining, pad inlay, spraying, etc. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubricating dirt pollution. Therefore, articulated bearings are widely used in swing motion, tilt motion and rotation motion with low speed.

Detailed Photos

Product Parameters

E series
		/mm
SI…E SI…ES	SA…E SA…ES	d
SI…E SI…ES	SA…E SA…ES	d	D	d1min	B	r1smin	α ≈	d3	c1 max	d2 max	h	l1 min	l2 max	h1	l3 min	l4 max	l5 max	d4 max	d5 max
SI5E	SA5E	5	14	7	6	0.3	13°	M5	4.5	21	36	16	48	30	11	42	5.0	10	13
SI6E	SA6E	6	14	8	6	0.3	13°	M6	4.5	21	36	16	48	30	11	42	5.0	11	13
SI8E	SA8E	8	16	10	8	0.3	15°	M8	6.5	24	42	21	55	36	15	49	5.0	13	16
SI10E	SA10E	10	19	13	9	0.3	12°	M10	7.5	29	48	26	63	43	15	58	5.5	16	19
SI12E	SA12E	12	22	15	10	0.3	10°	M12	8.5	34	54	28	71	50	18	67	7.0	19	22
SI15ES	SA15ES	15	26	18	12	0.3	8°	M14	10.5	40	63	34	83	61	21	81	8.0	22	26
SI17ES	SA17ES	17	30	20	14	0.3	10°	M16	11.5	46	69	36	92	67	24	90	10.0	25	29
SI20ES	SA20ES	20	35	24	16	0.3	9°	M20×1.5	13.5	53	78	43	105	77	30	104	10.0	28	34
SI25ES	SA25ES	25	42	29	20	0.6	7°	M24×2.0	18.0	64	94	53	126	94	36	126	12.0	35	42
SI30ES	SA30ES	30	47	34	22	0.6	6°	M30×2.0	20.0	73	110	65	147	110	45	147	15.0	42	50
SI35ES	SA35ES	35	55	39	25	0.6	6°	M36×3.0	22.0	82	140	82	182	125	60	167	15.0	48	58
SI40ES	SA40ES	40	62	45	28	0.6	7°	M39×3.0	24.0	92	150	86	198	142	65	180	18.0	52	65
SI45ES	SA45ES	45	68	50	32	0.6	7°	M42×3.0	28.0	102	163	92	217	145	65	199	20.0	58	70
SI50ES	SA50ES	50	75	55	35	0.6	6°	M45×3.0	31.0	112	185	104	246	160	68	221	20.0	62	75
SI60ES	SA60ES	60	90	66	44	1.0	6°	M52×3.0	39.0	135	210	115	282	175	70	247	20.0	70	88
SI70ES	SA70ES	70	105	77	49	1.0	6°	M56×4.0	43.0	160	235	125	318	200	80	283	20.0	80	98
SI80ES	SA80ES	80	120	88	55	1.0	6°	M64×4.0	48.0	180	270	140	365	230	85	325	25.0	95	110

SA5E NHS5 NOS5 KR13 NUKR35X DC2222G
SA6E NHS6 NOS6 KR16 NUKR40X DC2776
SA8E NHS8 NOS8 KR19 NUKR47X DC3034
SA10E NHS10 NOS10 KR22 NUKR52X DC3175(3C)
SA12E NHS12 NOS12 KR26 NUKR62X DC4445A
SA15ES NHS14 NOS14 KR30 NUKR62XA DC4972(4C)
SA17ES NHS16 NOS16 KR32 PUKR62 DC5476A(4C)
SA20ES NHS18 NOS18 KR35 NUKR72X DC5476B(4C)
SA25ES NHS20 NOS20 KR40 NUKR80X DC5476C(4C)
SA30ES NHS22 NOS22 KR47 NUKR86KX DC5776A
SA35ES NHS25 NOS25 KR52 NUKR90X DC6334B
SA40ES NHS28 NOS28 KR62 NUKR100X DC7221(5C)
SA45ES NHS30 NOS30 KR72 NUKR120X DC72221B
SA50ES KR80 NUKR140X DC7221B(5C)
SA60ES KR85 NUKR150X DC7969C(5C)
SA70ES KR90 NUKR160X DC8334C
SA80ES NUKR170X DC8729A
NUKR180X DC10323A(3C)
DC12334C
DC12388C(11C)

Packaging & Shipping

Company Profile

Our Advantages

Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.

SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.

CUSTOMIZED
The customized LOGO or drawing is acceptable for us.

MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

FAQ

1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales,
most customers’orders are more than 1 ton.
2.What is your latest delivery time?
Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by
customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible and provide the detailed information you need.
Please feel free to contact us, if you have any other question

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name:	Spherical Plain Bearing
Package:	Neutral Packing Bearing
Sliding Contact:	Steel-on-Steel
Features:	High Precision, Long Life, Low Noise
Service:	OEM ODM
Transport Package:	Carton Pallet

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

rod end bearing

Contribution of Rod End Bearings to Complex Motion in Industrial Machinery

Rod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute:

1. Articulation and Pivoting:

Industrial machinery often requires components that can pivot and articulate in multiple directions. Rod end bearings provide a flexible connection point, allowing for a wide range of motion. They are commonly used in applications like robotic arms, conveyor systems, and material handling equipment, where precise movement and adaptability are essential.

2. Load Transmission:

Industrial machinery frequently deals with heavy loads and dynamic forces. Rod end bearings efficiently transmit these loads from moving components to stationary structures. Whether it’s the linear movement of a press or the tilting motion of a heavy-duty crane, rod end bearings enable the smooth transfer of forces, reducing wear and tear on the machinery.

3. Misalignment Compensation:

Machinery parts can become misaligned due to manufacturing tolerances, wear, or other factors. Rod end bearings excel at compensating for misalignments, ensuring that moving parts remain connected and operational. This capability is crucial in applications with variable alignment requirements, such as industrial automation systems and assembly line equipment.

4. Precision and Control:

Many industrial processes demand precision and control over motion. Rod end bearings help achieve this by providing a reliable connection point that can be adjusted and fine-tuned. This precision is essential in applications like CNC machinery, where the accuracy of tool movement directly impacts the quality of the final product.

5. Corrosion Resistance:

Industrial machinery operates in diverse environments, some of which may expose components to moisture and corrosive substances. Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This ensures the bearings’ longevity and reliability, even in challenging conditions.

Overall, rod end bearings contribute to the efficient and reliable operation of industrial machinery with complex motion requirements. Their ability to accommodate articulation, handle heavy loads, compensate for misalignment, provide precision, and resist corrosion makes them invaluable components in various industrial applications.

rod end bearing

Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems

Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:

1. Steering Systems:

Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.

2. Suspension Systems:

In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.

3. Throttle and Accelerator Linkages:

Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.

4. Gear Shift Linkages:

In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.

5. Convertible Roof Mechanisms:

In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.

Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.

rod end bearing

Impact of Proper Lubrication on Rod End Bearings

Proper lubrication is crucial for enhancing the performance and extending the longevity of rod end bearings. Here’s how it impacts these aspects:

1. Reduced Friction: Lubrication creates a film between moving parts, reducing friction. This minimizes wear and heat generation, leading to smoother and more efficient operation of the rod end bearing.

2. Wear Prevention: Lubrication helps prevent wear and surface damage on bearing components, particularly the ball and raceway. This is vital for the long-term durability of the bearing.

3. Corrosion Resistance: In applications exposed to moisture or corrosive substances, lubrication provides a protective barrier, preventing rust and corrosion on the bearing’s surfaces. This is especially important in outdoor or marine environments.

4. Noise Reduction: Adequate lubrication reduces noise and vibration in the bearing. This is important for applications where noise levels must be minimized, such as in the aerospace or medical industries.

5. Temperature Control: Lubrication helps dissipate heat generated by friction. Effective temperature control prevents overheating, which can lead to premature bearing failure.

6. Seal and Shield Function: Lubrication also works in conjunction with bearing seals and shields to keep contaminants out. It maintains a clean and contaminant-free internal environment, further increasing the bearing’s longevity.

7. Longevity: Proper lubrication significantly extends the service life of rod end bearings. Regular maintenance and relubrication schedules are essential for maximizing the bearing’s operational lifespan.

8. Efficiency: Lubrication contributes to the overall efficiency of the bearing, ensuring that it operates at peak performance levels, even under heavy loads or misalignment conditions.

9. Performance Consistency: Adequate lubrication helps maintain consistent performance over time. This is especially important in critical applications where performance fluctuations could lead to safety or quality concerns.

It’s important to use the lubricant recommended by the bearing manufacturer and follow their guidelines for lubrication intervals. Over-lubrication can be as detrimental as under-lubrication, so maintaining the right balance is essential.

Regular inspections and maintenance routines should be established to monitor the lubrication condition and reapply lubricant as needed. This proactive approach ensures that rod end bearings operate effectively, offering reliability and a longer service life.

China supplier Rod End Bearing Ge90es GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality for Engineering Hydraulic Cylinders bearing block
editor by CX 2024-05-08

China high quality Custom Private Label Right or Left Hand Ball Joint Rod End Bearing with Best Sales

Product Description

Custom Private Label Right or Left Hand Ball Joint Rod End Bearing

HangZhou JOY INTERNATIONAL TRADE CO.LTD.is an industrial and trade enterprise integrating the development,design,production and sales of Vehicles Parts and Accessories,CNC Machining,Metal Stamping,Fasteners,Plastic and Rubber Parts etc.Providing customers with one-stop supply chain services is our main business.Keep customers satisfied is our enterprise purpose.Radiation Europe,the United States,Australia,UK and other countries and regions,with good customer resources and channels.
With quality control system of lSO/TS 16949:2009,the company has equipped with a full range of advanced testing equipment and also own several experienced engineers and quality controllers,which can ensure that the product quality is effectively controlled in the whole production process.Effective inspection report with corresponding material certificate will be provided for each shipment.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Yes
Warranty:	12 Months
Car Model:	Control Arm
Component:	Ball Joint
Payment:	Tt/LC
Shipment:	by Sea/ Air /Express

Samples:	US$ 76/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

rod end bearing

Recent Advancements in Rod End Bearing Technology

Advancements in rod end bearing technology have led to improved performance and durability. Here are some insights into recent developments:

1. Enhanced Materials: Manufacturers are using advanced materials, including high-strength alloys and composites, to create rod end bearings that offer increased load-carrying capacity and improved corrosion resistance. These materials contribute to longer bearing life and better performance in challenging environments.

2. Sealing and Shielding: Innovations in sealing and shielding technologies have improved the protection of rod end bearings from contaminants, moisture, and harsh environmental conditions. These advancements extend maintenance intervals and increase bearing reliability.

3. Lubrication: Self-lubricating rod end bearings have become more prevalent, reducing the need for frequent manual lubrication. These bearings are designed to provide consistent and long-lasting lubrication, resulting in reduced maintenance requirements and longer service life.

4. 3D Modeling and Simulation: Manufacturers are increasingly using 3D modeling and simulation techniques to optimize rod end bearing designs. This allows for the creation of bearings that can handle higher loads and offer superior wear resistance while maintaining compact dimensions.

5. Customization: The ability to customize rod end bearings to specific application requirements has improved. This includes options for different thread types, materials, and sizes. Customization ensures that the bearing can meet the exact needs of the equipment it serves.

6. Environmental Sustainability: Some recent advancements focus on producing rod end bearings in an environmentally sustainable manner. Manufacturers are exploring eco-friendly materials and production processes to reduce the environmental impact of bearing manufacturing.

7. IoT Integration: In industrial applications, the integration of Internet of Things (IoT) technology allows for real-time monitoring and predictive maintenance of rod end bearings. Sensors and data analytics help detect early signs of wear or damage, optimizing maintenance schedules and minimizing downtime.

These recent advancements in rod end bearing technology have collectively improved the reliability, durability, and performance of these components in various mechanical systems. As technology continues to evolve, rod end bearings are expected to play an even more critical role in enhancing the efficiency and longevity of machinery and equipment.

rod end bearing

Signs of Wear or Damage in Rod End Bearings and Replacement Guidelines

Rod end bearings are critical components in various mechanical systems, and it’s essential to monitor them for signs of wear or damage. Here are common indicators and guidelines for replacement:

1. Excessive Play or Looseness: If you notice excessive play or looseness in the rod end bearing, it’s a clear sign of wear. This can result in imprecise control and reduced system performance, so replacement is recommended.

2. Unusual Noises: Unusual noises such as knocking, clicking, or squeaking during movement are often indicative of rod end bearing issues. These noises can be a result of worn bearing surfaces or damaged components. Address the problem promptly to prevent further damage.

3. Corrosion or Rust: Exposure to moisture or harsh environmental conditions can lead to corrosion and rust on rod end bearings. Corroded bearings may not move smoothly, impacting system operation. If you observe significant corrosion, consider replacement.

4. Visible Damage: Any visible damage, such as cracks, dents, or deformation of the bearing’s body or components, should be taken seriously. Damaged rod end bearings can fail unexpectedly, leading to safety risks and system malfunctions. Replace them if damage is detected.

5. Reduced Range of Motion: If the rod end bearing restricts the range of motion or does not articulate smoothly, it may be worn or damaged. This can affect the performance of the associated system. Replacement is advisable to restore proper functionality.

6. Increased Friction: A sudden increase in friction during movement can indicate a lack of lubrication, contamination, or damage to the bearing surfaces. Re-greasing and cleaning may help, but if the issue persists, consider replacing the bearing.

7. Maintenance Intervals: Depending on the application, rod end bearings may have recommended maintenance intervals. Follow these guidelines and inspect the bearings during routine maintenance. If wear or damage is detected, replace them as necessary.

8. Safety Concerns: In safety-critical applications, it’s vital to prioritize bearing replacement at the first sign of wear or damage. Failure to do so can result in accidents or system failures with serious consequences.

Regular inspection and maintenance of rod end bearings are essential to ensure the continued reliability and performance of mechanical systems. When any of the above signs are observed, it’s advisable to replace the bearings promptly to prevent further issues and potential safety risks.

rod end bearing

Impact of Proper Lubrication on Rod End Bearings

Proper lubrication is crucial for enhancing the performance and extending the longevity of rod end bearings. Here’s how it impacts these aspects:

2. Wear Prevention: Lubrication helps prevent wear and surface damage on bearing components, particularly the ball and raceway. This is vital for the long-term durability of the bearing.

5. Temperature Control: Lubrication helps dissipate heat generated by friction. Effective temperature control prevents overheating, which can lead to premature bearing failure.

8. Efficiency: Lubrication contributes to the overall efficiency of the bearing, ensuring that it operates at peak performance levels, even under heavy loads or misalignment conditions.

China high quality Custom Private Label Right or Left Hand Ball Joint Rod End Bearing with Best Sales
editor by CX 2024-05-08

China supplier High Precision Combination Connecting Rod End Radial Spherical Plain Joint Ball Bearing ball bearing

Product Description

High Precision Combination Connecting Rod End Radial Spherical Plain Joint Ball Bearing

Product Description

Spherical plain bearing is made up by inner ring and outer ring. The inner ring has a spherical outside surface and the outer ring has inner spherical surface. It can support large load including radial load, axial load or combination load according to the different types and structures. Spherical plain bearing is general used for lower speed swinging motion. Since the sliding surface is spherical, it also can do
tilt movement in certain angle range. Spherical plain bearing resists corrosion and abrasion. And also it has the character of self-aligning, lubrication and self-aligning.It can work well even if in dislocated installation.

Company Profile

HangZhou HONGSHI MACHINERY AND ELECTRICAL EQUIPMENT CO.,LTD. (formerly HangZhou Hengmai Bearing Co., Ltd.) was established in 2007, and HMMH is our own brand.
HMMH mainly produces spherical roller bearings, pillow block ball bearing, deep groove ball bearings and cylindrical roller bearings. Spherical roller bearing products range from 20mm to 1M, with the main production of crusher bearings 22300 series. Low noise deep groove ball bearings, product accuracy can reach ZV2, ZV3, ZV4, mainly produces motor bearings 6200, 6300 series. pillow block ball bearing, mainly producing UCP, UCF, UCFL, UCFC, UCT series, the products are mainly used in agricultural machine and peeling machine. We also use the bainite quenching process to ensure the hardness of the bearing, using good testing equipment, such as roundness meter, profiler, roughness meter, universal measuring instrument, spectrometer, metallographic microscope to control each detail quality monitoring.

To ensure product quality, we have established a strict quality control system and an experienced team of engineers and after-sales service. From forgings to final products we have a strict quality control system.

Your needs are our production motivation, and your satisfaction is our goal. We are willing to serve our customers with the goal of “Quality First, Service First, Credit First”.

FAQ

1.A:How can I do customized design?
Q:We are request for the drawing with the measurement, material and other speicifcation as details as you can, and for the customized products, our MOQ is 10 pcs per design

2.Q: How can I get a sample?
A: If you only need 1or 2 samples for small size inner weight below 2kgs, we can supply free samples and we have stocks, you can just pay the shipping cost .if you need several design samples, then you should paid the cost with shipping.

3.Q: What package do you usually use?
A: Usually we use single box or tape. Also according to customer’s special requirement.

4.Q:How long do you need for production? Or what’s your production lead time?
A:Usually could be sent our in 2-3 days if in stock for samples. Customized item usually need 14-30 days to produce.

5.Q:How long will you guarantee your quality?
A:We supply test report and quality control photos from materials to finished goods during production.

6.Q:How to do after sale service?
A:Good after-sale service is our promise. Before placing orders, our professional engineer will discuss all technical data and your bearing usage condition and CZPT you what kind of steel materials to fit your products and usage life possible.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	45°
Aligning:	Non-Aligning Bearing
Separated:	Unseparated
Rows Number:	Single
Load Direction:	Axial Bearing
Material:	Bearing Steel

Customization:	Available \| Customized Request

rod end bearing

Differences Between Male and Female Threaded Rod End Bearings

Male and female threaded rod end bearings differ in their design and applications:

Male Threaded Rod End Bearings:

– Male rod end bearings have external threads on the shank or body of the bearing.

– They are typically used in applications where the bearing is mounted to a stationary component, and the threaded shank extends to connect with a mating part (e.g., a linkage or control arm).

– Male rod end bearings allow for easy adjustment or fine-tuning of the connection.

– These bearings are suitable for applications requiring controlled movement or positioning, where the bearing’s external threads facilitate precise adjustments.

Female Threaded Rod End Bearings:

– Female rod end bearings have an internal (female) threaded bore inside the housing.

– They are used when a bolt, stud, or shaft with external threads needs to be connected to the bearing’s housing.

– Female rod end bearings are often employed in applications where the bearing needs to rotate around a fixed shaft or bolt, providing articulation and misalignment capabilities.

– These bearings allow for the attachment of a variety of external components, making them versatile for different applications.

The choice between male and female threaded rod end bearings depends on the specific requirements of the application, including whether the bearing needs to be attached to a stationary part or connected to an external threaded component and the level of adjustability and articulation needed.

rod end bearing

Impact of Different Materials on Rod End Bearing Performance

Rod end bearings can be manufactured from various materials, and the choice of material significantly affects their performance. Two common materials used are stainless steel and carbon steel:

Stainless Steel Rod End Bearings:

1. Corrosion Resistance: Stainless steel rod end bearings offer excellent resistance to corrosion, making them suitable for applications in wet or corrosive environments, including marine and outdoor settings.

2. Hygienic Applications: They are ideal for applications in food processing, pharmaceuticals, and medical equipment due to their non-reactive and hygienic properties.

3. Temperature Resistance: Stainless steel can withstand a wide range of temperatures, making these bearings suitable for applications exposed to extreme heat or cold.

Carbon Steel Rod End Bearings:

1. Strength and Durability: Carbon steel rod end bearings are known for their high strength and durability, making them suitable for heavy-duty industrial applications such as construction equipment and agricultural machinery.

2. Cost-Effectiveness: They are often more cost-effective than stainless steel bearings, which makes them a preferred choice when the enhanced corrosion resistance of stainless steel is not required.

3. Machinability: Carbon steel is easier to machine and modify, making it a good choice for customized or specialized bearing configurations.

Ultimately, the choice between stainless steel and carbon steel rod end bearings depends on the specific application’s environmental conditions, load requirements, and cost considerations. Stainless steel is preferred for its corrosion resistance, while carbon steel excels in applications demanding strength and durability.

rod end bearing

Rod End Bearings and Their Applications

Rod end bearings, also known as heim joints or rose joints, are mechanical components that consist of a spherical plain bearing with an inner ring and an outer ring. They are widely used in various mechanical applications due to their versatility and ability to provide articulation and movement in different directions. Here are some common applications of rod end bearings:

Linkages: Rod end bearings are often used in linkages and control systems to transmit motion or force. They provide a connection point between two components, allowing for angular misalignment and smooth movement.
Automotive Suspension: In automotive applications, rod end bearings are used in suspension systems to connect control arms, sway bars, and other components. They accommodate both rotational and pivoting movement.
Aerospace: Rod end bearings play a crucial role in aircraft control systems, such as ailerons, flaps, and rudders. They ensure precise and responsive control of the aircraft’s movable surfaces.
Construction Equipment: Heavy machinery, like cranes and excavators, utilizes rod end bearings in their control systems. These bearings provide flexibility and robustness in handling heavy loads and dynamic forces.
Industrial Machinery: Various industrial machines, including conveyor systems, manufacturing equipment, and robotic arms, use rod end bearings to enable movement and articulation in mechanical linkages.
Marine Applications: On boats and ships, rod end bearings are employed in steering and control systems. They withstand the harsh marine environment and provide reliable performance.
Motion Control Systems: In applications like 3D printers, CNC machines, and robotic arms, rod end bearings are used to create flexible and precise motion control mechanisms.
Hydraulic Cylinders: Rod end bearings are used in hydraulic cylinders to connect the piston rod to the external components. They allow for both linear motion and misalignment.
Off-Road Vehicles: In off-road vehicles such as ATVs and dirt bikes, rod end bearings are used in suspension systems to absorb shocks and provide articulation over rough terrain.

Rod end bearings are valued for their ability to handle both static and dynamic loads, accommodate misalignment, and offer long-lasting performance in a wide range of applications.

China supplier High Precision Combination Connecting Rod End Radial Spherical Plain Joint Ball Bearing ball bearing
editor by CX 2024-05-07

China wholesaler 40SBB64jo1970 Rod End Bearing Spherical Plain Bearing Radial with high quality

Product Description

Spherical Plain Bearing

Basic Info.

Model NO.	GE 55 SX	Separated	Separated
MOQ	1PCS	Quality	Guaranteed
Mainly Market	America Europe Asia Africa	Serive	OEM
Stock	Rich Stocks	Feature	High Precision, Small Torque, Low Noise
Transport Package	Industrial Packing or as Per Requirement	Specification	GE 55 SX
Trademark	FOS Bearing or OEM	Origin	YANDIAN, ZheJiang
HS Code	8482200000	Production Capacity	7000PCS/Month

Product Decription

Knuckle-bearing is a spherical plain bearing, its sliding contact surface is an inner sphere and an outer sphere, which can rotate and swing at any Angle when moving, it is made of surface phosphating, blasting, insert pad, spraying and other special process processing methods. Joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning, good lubrication and so on.
Product Series
More series of Roller bearing
Knuckle bearing

odel	Shaft Diameter	Mass	Dimensions (mm)							Basic load ratings
		kg	d	D	T	dk	D1	B	C	Dyn.	Stat.
			d	D	T	dk	D1	B	C	Cr N	Cor . N
GE 25 SX	25	0.14	25	47	15	42.5	31.4	14	14	47800	239000
GE 28 SX	28	0.18	28	52	16	47	35.7	15	15	57500	287000
GE 30 SX	30	0.21	30	55	17	50	36.1	16	16	64600	323000
GE 35 SX	35	0.27	35	62	18	56	42.4	17	17	78500	392000
GE 40 SX	40	0.33	40	68	19	60	46.8	18	18	90600	453000
GE 45 SX	45	0.42	45	75	20	66	52.9	19	19	106000	532000
GE 50 SX	50	0.46	50	80	20	74	59.1	19	19	118000	590000
GE 55 SX	55	0.68	55	90	23	80	62	22	22	149000	745000
GE 60 SX	60	0.73	60	95	23	86	68.1	22	22	160000	857100
GE 65 SX	65	0.77	65	100	23	92	75.6	22	22	173000	867000
GE 70 SX	70	1.1	70	110	25	102	82.2	24	24	208000	1040000
GE 80 SX	80	1.5	80	125	29	115	90.5	27	27	244000	1220000
GE 90 SX	90	2.1	90	140	32	130	103.3	30	30	313000	1560000
GE100SX	100	2.3	100	150	32	140	114.3	30	30	339000	1690000
GE110SX	110	3.9	110	170	38	160	125.8	36	36	469000	2340000
GE120SX	120	4	120	180	38	170	135.4	36	36	498000	2490000
GE130SX	130	6.1	130	200	45	190	148	42	42	622000	3110000
GE140SX	140	6.5	140	210	45	200	160.6	42	42	663000	3310000
GE150SX	150	7.9	150	225	48	213	170.9	45	45	764000	3820000
GE160SX	160	9.4	160	240	51	225	181.4	48	48	872000	4360000
GE170SX	170	13	170	260	57	250	194.3	54	54	1080000	5440000
GE180SX	180	17.5	180	280	64	260	205.5	61	61	1310000	6590000
GE190SX	190	18.3	190	290	64	275	211.8	61	61	1370000	6850000
GE200SX	200	23.3	200	310	70	290	229.2	66	66	1540000	7740000

Production Process
Production Process

Inspection
Our Advantage

Package and shipment

Company Profile

HangZhou Siruibo Bearing Technology Co., Ltd. is a company mainly engaged in manufacturing and selling outer spherical bearings. The registered capital is Five million.

Since its establishment 20 years ago, the company is committed to Mounted Bearing Unit (maintenance-free bearings, engraving machine bearings, holding machine shaft Bearing, no-tillage machine bearing, fan bearing, high temperature bearing, zinc alloy bearing, food grade bearing unit) research and development. With the most complete varieties and best advanced manufacturing technology in production of Mounted Bearing Unit, to be a reliable enterprises, we welcome your cooperation. Currently, our company produce 10 series of more than 260 varieties of outer spherical bearings and 13 different structural categories of outer spherical bearing special seats, all adopted International standard design and manufacturing. Registered trademark “FOS” .

Through the efforts and unremitting pursuit of all employees of the company, all products accepted by international standards. Over the years of Expansion and technical transformation, we developed into a Mounted Bearing Unit with large scale of professional manufacturers, for the bearing industry in China, has made a contribution to the development of Bearing.

HangZhou Siruibo Bearing Technology Co., Ltd. has a production capacity of 1 million sets/year, with an annual output value of 30 million yuan. We produce 30 varieties monthly , with 45-60 days lead time.

The company has a perfect material and product quality inspection equipment, according to the strict scientific Quality assurance system, to prove satisfactory to our customers. Our products widely used in agricultural Industry machinery, textile machinery and light industry, chemical industry, metallurgy, printing, food, transportation, coal, packaging and other industries and the introduction of machinery .Our products have exported to Europe, America and many countries and regions in South east Asia.

Exhibitions

About us:
We are 1 manufactuer of bearing for more than 20 years.
Give us a chance, we will cooperate with our passion.
Our professional, reliable, experienced products and service can meet your request.
Why choose us?

SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.

CUSTOMIZED
The customized LOGO or drawing is acceptable for us.

MOQ
1. MOQ: 10 PCS mix different standard bearings.
2. MOQ: 3000 PCS customized your brand bearings.

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks!
We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	15°
Aligning:	Non-Aligning Bearing
Separated:	Unseparated
Rows Number:	Single
Load Direction:	Radial Bearing
Material:	Bearing Steel

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

rod end bearing

Role of Seals and Boots in Protecting Rod End Bearings

Seals and boots serve a crucial role in safeguarding rod end bearings from contaminants and moisture in various applications. Here’s an overview of their functions:

Contaminant Protection:

Rod end bearings are often exposed to harsh environments, including dust, dirt, debris, and other contaminants. Seals and boots create a protective barrier around the bearing’s moving parts, preventing these contaminants from entering the bearing’s internal components.

By effectively sealing off the bearing, they help maintain the integrity of the lubricant and prevent abrasive particles from causing premature wear or damage to the bearing surfaces. This is especially important in applications where cleanliness and reliability are critical, such as aerospace, automotive, industrial machinery, and more.

Moisture Resistance:

In applications where exposure to moisture is a concern, seals and boots act as a defense against water, humidity, and other liquid contaminants. This is vital for preventing corrosion and maintaining the performance of the rod end bearing over time.

Seals and boots are often made from materials that are resistant to moisture, enhancing their protective capabilities. They create a barrier that keeps water away from sensitive bearing components, such as rolling elements and raceways.

Increased Lifespan:

By preventing contaminants and moisture from infiltrating the bearing, seals and boots extend the lifespan of the rod end bearing. They contribute to the overall durability and reliability of the bearing in various applications, ultimately reducing maintenance requirements and replacement intervals.

It’s important to select the right type of seal or boot for a specific application, taking into account factors such as the level of contamination, exposure to moisture, operating conditions, and temperature range. Proper maintenance and periodic inspection of seals and boots are also essential to ensure continued protection and optimal bearing performance.

rod end bearing

Challenges and Solutions in Managing Load and Misalignment in Rod End Bearings

Rod end bearings often face challenges related to load capacity and misalignment in various applications. Here are the common challenges and solutions:

1. Radial and Axial Loads:

Challenge: Rod end bearings need to handle both radial and axial loads simultaneously in many applications.

Solution: Select rod end bearings with appropriate load ratings and materials to ensure they can withstand the expected loads. Also, proper maintenance and lubrication are essential for maximizing load-carrying capacity.

2. Misalignment:

Challenge: Misalignment can cause premature wear and reduced bearing lifespan.

Solution: Use self-aligning rod end bearings or incorporate spherical plain bearings to compensate for misalignment. Regular inspection and maintenance to correct any alignment issues are crucial.

3. Corrosion and Contaminants:

Challenge: Exposure to moisture, chemicals, and contaminants can lead to corrosion and damage.

Solution: Choose rod end bearings with suitable protective coatings or seals, such as PTFE liners or rubber boots, to prevent contaminants from entering. Stainless steel bearings offer enhanced corrosion resistance.

4. Lubrication:

Challenge: Inadequate lubrication can result in increased friction, overheating, and premature failure.

Solution: Follow the manufacturer’s lubrication recommendations and maintenance schedules. Proper lubrication ensures smooth operation and extends bearing life.

5. Shock and Impact Loads:

Challenge: Applications with frequent shock and impact loads can subject rod end bearings to excessive stress.

Solution: Choose rod end bearings with robust construction and materials to withstand shock loads. Regular inspections are necessary to detect early signs of damage.

By addressing these challenges with appropriate solutions, rod end bearings can perform optimally and provide long-lasting service in a wide range of applications.

rod end bearing

Design Principles and Functions of Rod End Bearings

Rod end bearings, also known as heim joints or rose joints, are essential components in various mechanical applications, where articulation and precise control of movement are required. These bearings are designed with specific principles and functions in mind:

Design Principles:

Rod end bearings consist of a spherical plain bearing, also known as a spherical plain bushing, within a housing. The design principles are as follows:

Spherical Plain Bearing: The heart of a rod end bearing is a spherical plain bearing. This bearing allows the inner ring to tilt and rotate in multiple directions. It consists of an inner and outer ring with a sliding layer of material in between, often made from self-lubricating materials.
Housing: The spherical plain bearing is housed within a protective casing, typically made of metal or other durable materials. The housing provides structural support and retains the bearing components.
Threaded Shank: The outer part of the housing is often shaped as a threaded shank, allowing for easy attachment to various mechanical components, such as linkages or control arms.
Lubrication Fittings: Many rod end bearings have provisions for lubrication fittings to ensure smooth articulation and reduce friction.

Functions:

Rod end bearings serve several crucial functions in mechanical systems:

Articulation: Rod end bearings provide articulation, enabling components to pivot, swivel, and move in multiple directions. This function is vital in applications requiring flexibility and control over movement.
Angular Misalignment Compensation: They can compensate for both static and dynamic angular misalignment. This is particularly useful in situations where components may not align perfectly due to varying factors like vibration or assembly tolerances.
Load Transmission: Rod end bearings can transmit static and dynamic loads, making them suitable for applications involving force or load transfer. They are used in machinery and equipment where precise control of loads is essential.
Precision Movement: These bearings provide precise control and movement, making them suitable for applications where accurate positioning of mechanical components is critical. This includes industries like aerospace and robotics.
Corrosion Resistance: Many rod end bearings are designed with corrosion-resistant materials or coatings, making them suitable for use in harsh environments, such as marine and industrial settings.
Durability: Rod end bearings are engineered for durability, allowing them to withstand challenging conditions and heavy-duty use. This ensures their reliability and longevity in demanding applications.
Versatility: Rod end bearings are versatile components used across various industries, including automotive, aerospace, industrial machinery, and marine applications. Their adaptability and reliability make them valuable to engineers and designers.

These design principles and functions of rod end bearings make them indispensable in a wide range of mechanical systems where articulation, load-bearing capacity, and precise control are required.

China wholesaler 40SBB64jo1970 Rod End Bearing Spherical Plain Bearing Radial with high quality
editor by CX 2024-04-26

China Standard High Performance Rod End Bearing Ge6pw Radial Spherical Plain Bearing Ge6pw with 6X16X9mm supplier

Product Description

GEG230XS-2RS Ball Joint Bearing Radial Spherical Plain Bearing GEG 230 XS-2RS-L571
GE Series Radial Spherical Plain Bearing

Product Name	Spherical Plain Bearing
Precision Rating	P6, P0, P5, P4, P2
Material	Bearing Steel (GCr15)
Clearance	C0 C1 C2 C3 C4 C5
Vibration & Noisy	Z1,Z2,Z3 V1,V2,V3
Sliding Contact	Steel-on-Steel
Features	High Precision, High Speed, Long Life, High Reliability, Low Noise , Reduce Friction
Certification	ISO 9001:2008
Packing	1.Neutral Packing Bearing 2.Industrial Packing 3.Commercial Packing Bearing 4.Customize
Delivery Time	30 – 45 Days After The Order is Confirmed
Shippment	1.By Sea 2.By Air 3.By Express

Product Description

Bearing No.	Dimensions(mm)							Load ratings KN		a° ≈	weight ≈ kg
Bearing No.	d	D	B	c	dk	rs	r1s	Dynamic	Static	a° ≈	weight ≈ kg
GE15ES-2RS	15	26	12	9	22	0.3	0.3	16	84	8	0.571
GE17ES-2RS	17	30	14	10	25	0.3	0.3	21	106	10	0.041
GE20ES-2RS	20	35	16	12	29	0.3	0.3	30	146	9	0.066
GE25ES-2RS	25	42	20	16	35.5	0.6	0.6	48	240	7	0.119
GE30ES-2RS	30	47	22	18	40.7	0.6	0.6	62	310	6	0.153
GE35ES-2RS	35	55	25	20	47	0.6	1	79	399	6	0.233
GE40ES-2RS	40	62	28	22	53	0.6	1	99	495	7	0.306
GE45ES-2RS	45	68	32	25	60	0.6	1	127	637	7	0.427
GE50ES-2RS	50	75	35	28	66	0.6	1	156	780	6	0.546
GE55ES-2RS	55	85	40	32	74	0.6	1	200	1000	7	0.939
GE60ES-2RS	60	90	44	36	80	1	1	245	1220	6	1.04
GE70ES-2RS	70	105	49	40	92	1	1	313	1560	6	1.55
GE80ES-2RS	80	120	55	45	105	1	1	400	2000	6	2.31
GE90ES-2RS	90	130	60	50	115	1	1	488	2440	5	2.75
GE100ES-2RS	100	150	70	55	130	1	1	607	3030	7	4.45
GE110ES-2RS	110	160	70	55	140	1	1	654	3270	6	4.82
GE120ES-2RS	120	180	85	70	160	1	1	950	4750	6	8.05
GE140ES-2RS	140	210	90	70	180	1	1	1070	5350	7	11.02
GE160ES-2RS	160	230	105	80	200	1	1	1360	6800	8	14.01
GE180ES-2RS	180	260	105	80	225	1.1	1.1	1530	7650	6	18.65
GE200ES-2RS	200	290	130	100	250	1.1	1.1	2120	10600	7	28.03
GE220ES-2RS	220	320	135	100	275	1.1	1.1	2320	11600	8	35.51
GE240ES-2RS	240	340	140	100	300	1.1	1.1	2550	12700	8	39.91
GE260ES-2RS	260	370	150	110	325	1.1	1.1	3030	15190	7	51.54
GE280ES-2RS	280	400	155	120	350	1.1	1.1	3570	17850	6	65.06
GE300ES-2RS	300	430	165	120	375	1.1	1.1	3800	19100	7	78.07

Detailed Photos

Classification

Company Profile

design and features

Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface.

Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated , or where oscillating or recurrent tilting or slewing movements must be possible at relatively slow sliding speeds , often accompanied with heavy loads .

Packaging & Shipping

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.We have our own brand:HQA .If you interested in our product,I can take you to visit our factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Where is your factory located? How can I visit there?
A: Our factory is located in ZheJiang Province,You can take the high-speed rail or plane to visit.

Q: Do you provide samples ? it is free charge?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q:The MOQ is how much?
A: About ordinary standard type of bearing ,We have rich inventory,not have MOQ,if your need a
product is Non-standard size,need customize,we will according the product size to determine the MOQ.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	0
Aligning:	Non-Aligning Bearing
Separated:	Separated
Rows Number:	Single
Material:	Gcr15
Type:	Sliding Bearings

Samples:	US$ 0.01/Set 1 Set(Min.Order) \| Request Sample

rod end bearing

Improving Aircraft Functionality with Rod End Bearings

Rod end bearings play a critical role in enhancing the functionality and safety of various aircraft components, including control surfaces and landing gear. Here’s how:

Aircraft Control Surfaces:

Rod end bearings are commonly used in aircraft control systems to connect control surfaces, such as ailerons, elevators, and rudders, to control cables or rods. These bearings provide several key benefits:

Articulation: Rod end bearings offer articulation capabilities, allowing control surfaces to move smoothly and precisely. This flexibility is essential for pilots to control the aircraft’s attitude, roll, pitch, and yaw.
Misalignment Compensation: Aircraft structures experience various forces and vibrations during flight. Rod end bearings accommodate misalignment, ensuring that control systems remain effective even under dynamic conditions.
Durability: Aircraft operate in challenging environments, and rod end bearings are designed to withstand extreme temperatures, vibrations, and mechanical stress. Their robust construction contributes to the longevity and reliability of control systems.
Weight Savings: Aircraft design prioritizes weight reduction. Rod end bearings, typically made from lightweight materials like high-strength alloys or composites, help minimize the overall weight of the aircraft.

Landing Gear:

Rod end bearings are also utilized in landing gear systems, which are critical for safe takeoffs, landings, and ground operations. Their contributions include:

Shock Absorption: Landing gear components, including rod end bearings, play a role in shock absorption during landing, reducing the impact forces transmitted to the aircraft’s structure and passengers.
Articulation for Retraction and Extension: Rod end bearings enable the controlled movement of landing gear components, allowing for smooth retraction and extension. This is crucial for aerodynamic efficiency and safety.
Structural Integrity: Rod end bearings help maintain the structural integrity of the landing gear assembly, ensuring that it can support the aircraft’s weight during ground operations.

Overall, rod end bearings in aircraft applications contribute to the precise control, safety, and structural reliability necessary for aviation. Their ability to handle articulation, misalignment, and challenging operating conditions makes them indispensable components in the aerospace industry.

rod end bearing

Impact of Different Materials on Rod End Bearing Performance

Rod end bearings can be manufactured from various materials, and the choice of material significantly affects their performance. Two common materials used are stainless steel and carbon steel:

Stainless Steel Rod End Bearings:

2. Hygienic Applications: They are ideal for applications in food processing, pharmaceuticals, and medical equipment due to their non-reactive and hygienic properties.

3. Temperature Resistance: Stainless steel can withstand a wide range of temperatures, making these bearings suitable for applications exposed to extreme heat or cold.

Carbon Steel Rod End Bearings:

3. Machinability: Carbon steel is easier to machine and modify, making it a good choice for customized or specialized bearing configurations.

rod end bearing

Rod End Bearings and Their Applications

Linkages: Rod end bearings are often used in linkages and control systems to transmit motion or force. They provide a connection point between two components, allowing for angular misalignment and smooth movement.
Automotive Suspension: In automotive applications, rod end bearings are used in suspension systems to connect control arms, sway bars, and other components. They accommodate both rotational and pivoting movement.
Aerospace: Rod end bearings play a crucial role in aircraft control systems, such as ailerons, flaps, and rudders. They ensure precise and responsive control of the aircraft’s movable surfaces.
Construction Equipment: Heavy machinery, like cranes and excavators, utilizes rod end bearings in their control systems. These bearings provide flexibility and robustness in handling heavy loads and dynamic forces.
Industrial Machinery: Various industrial machines, including conveyor systems, manufacturing equipment, and robotic arms, use rod end bearings to enable movement and articulation in mechanical linkages.
Marine Applications: On boats and ships, rod end bearings are employed in steering and control systems. They withstand the harsh marine environment and provide reliable performance.
Motion Control Systems: In applications like 3D printers, CNC machines, and robotic arms, rod end bearings are used to create flexible and precise motion control mechanisms.
Hydraulic Cylinders: Rod end bearings are used in hydraulic cylinders to connect the piston rod to the external components. They allow for both linear motion and misalignment.
Off-Road Vehicles: In off-road vehicles such as ATVs and dirt bikes, rod end bearings are used in suspension systems to absorb shocks and provide articulation over rough terrain.

Rod end bearings are valued for their ability to handle both static and dynamic loads, accommodate misalignment, and offer long-lasting performance in a wide range of applications.

China Standard High Performance Rod End Bearing Ge6pw Radial Spherical Plain Bearing Ge6pw with 6X16X9mm supplier
editor by CX 2024-04-26

China Custom Custom High Precision Metric Small Stainless Steel Ball Joint Rod End Bearing supplier

Product Description

Ball Joint Rod Ends is made up of Zinc base alloy, ball joint shank of carbon steel. It has characteristics of self-aligning, wear-resistance and easy mounting, apply to transportation vechle, packing machinery, agricultural machinery, ect..

Model No.	Dimensions(mm)																		Static Load	N.W.
	d	d1	d2	d3	I	I1	I2	I3	S1	L	L1	L2	L3	D1	D2	D3	S2	a		kg
	d	d1	min	max	max	min	I2	max	S1	max	L1	max	max	max	max	max	S2	a
RBL5-R	5	M5	9	19	29	8	10	21	7	35	27	4	14	9	11	16	9	25	2.2	0.026
RBL6-R	6	M6	10	20	35.5	11	11	26	8	40	30	5	14	10	13	19	11	25	3.5	0.039
RBL8-R	8	M8	12	24	42.5	12	14	31	10	48	36	6	17	12.5	16	23	14	25	6.6	0.068
RBL10-R	10	M10x1.25	14	30	50.5	15	17	37	11	57	43	6.5	21	15	19	27	17	25	10	0.112
RBL10-R-1	10	M10x1.5	14	30	56.5	21	17	43	11	57	43	6.5	21	15	19	27	17	25	10	0.112
RBL12-R	12	M12x1.25	17	32	57.5	17	19	42	15	66	50	6.5	25	17.5	22	31	19	25	16	0.164
RBL12-R-1	12	M12x1.75	17	32	64.5	24	19	49	15	66	50	6.5	25	17.5	22	31	19	25	16	0.164
RBL14-R	14	M14x1.4	19	38	73.5	22	21.5	56	17	75	57	8	26	17.5	25	35	22	25	19	0.254
RBL14-R-1	14	M14x2	19	39	79.5	28	21.5	62	17	75	57	8	26	20	25	35	22	25	19	0.5714
RBL16-R	16	M16x1.5	22	44	79.5	23	23.5	60	19	84	64	8	32	20	28	39	22	20	26	0.336
RBL16-R-1	16	M16x2	22	44	85.5	29	23.5	66	19	84	64	8	32	22	28	39	22	20	26	0.366
RBL18-R	18	M18x1.5	23	46	90	25	26.5	68	20	93	71	10	34	25	31	44	27	20	33	0.464
RBL20-R	20	M22x1.5	27	50	90	25	27	68	24	99	77	10	35	27.5	36	66	30	20	45	0.538
RBL22-R	22	M22x1.5	27	52	95	26	28	70	24	109	84	12	41	30	37	50	32	16	48	0.713

Q1: Can I get a free sample?
A1: We provide samples free in freight collected. For special samples requirement, please contact us for more details.
Q2: How could I pay?
A2: We prefer T/T or L/C at sight. If you prefer other payment terms, please contact us freely.
Q3: What is your brand and packing way? Can you produce my brand and packing?
A3: Our brand is SGC and our own packing materials. We can make your brand. For more details, please contact us.
Q4: What is the delivery lead time?
A4: It depends on the order quantities. The mass production lead time is about 45-60 days after receipt of the deposit.
Q5: Are you manufacturer or trading company?
A5: We are manufacturer and exporter. We provide all kinds of OEM services for clients around the world.
Q6: Where is your main market?
A6: We export to the North America, Mexico, Australia, South-east Asia, Europe, U.A.E., Turkey, and other countries.

Our Services
1. Professional QC and QA team to make sure all products qualified before shipping.
2. Competitive price.
3 .Standard package to ensure the safe transportation.
4. Professional service.

Why choose us?
1. Production
Qualified production, competitive price, professional service.
2. Quality
All products are inspected 100% before shipment by relative testing equipments.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element:	Single Row
Structure:	Ball Joint
Material:	Alloy
Load Direction:	Radial Spherical Plain Bearing
Add Lubricant:	Self-lubricating
Outer Structure:	Whole Outer Ring

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

rod end bearing

Contribution of Rod End Bearings to Complex Motion in Industrial Machinery

Rod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute:

1. Articulation and Pivoting:

2. Load Transmission:

3. Misalignment Compensation:

4. Precision and Control:

5. Corrosion Resistance:

rod end bearing

Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems

Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:

1. Steering Systems:

2. Suspension Systems:

3. Throttle and Accelerator Linkages:

4. Gear Shift Linkages:

5. Convertible Roof Mechanisms:

rod end bearing

Advantages of Rod End Bearings

Rod end bearings offer several advantages compared to other bearing types, making them suitable for specific applications that require articulation, flexibility, and precise control. Here are some key advantages of rod end bearings:

Articulation: Rod end bearings are designed to provide articulation, enabling movement in multiple directions. They allow for angular misalignment, making them ideal for applications that require flexible connections and motion control.
Angular Misalignment: They can accommodate both static and dynamic angular misalignment. This ability to handle misalignment is a significant advantage in applications where components may not align perfectly.
High Load Capacity: Rod end bearings are capable of handling both static and dynamic loads. They are used in applications where significant forces or loads need to be transmitted, such as in heavy machinery and construction equipment.
Precision: These bearings provide precise control and movement. They are often used in applications where accurate positioning and control of mechanical components are essential, such as in aerospace and robotics.
Corrosion Resistance: Many rod end bearings are available with corrosion-resistant coatings or materials, making them suitable for use in challenging environments, including marine and industrial settings.
Durability: Rod end bearings are built to withstand harsh conditions, making them durable and long-lasting. They can handle the rigors of heavy-duty applications, ensuring reliability and performance over time.
Versatility: These bearings find applications in a wide range of industries, from automotive and aerospace to industrial machinery and marine. Their versatility is a significant advantage for engineers and designers.

Overall, rod end bearings excel in applications that require a combination of articulation, load-bearing capacity, and precision. Their ability to handle misalignment and provide reliable performance in demanding environments makes them a preferred choice in various industries.

China Custom Custom High Precision Metric Small Stainless Steel Ball Joint Rod End Bearing supplier
editor by CX 2024-04-25

China OEM CZPT Factory Bearing High Performance Si20t/K Rod End Joint Bearing bearing assembly

Product Description

Structure:

Joint bearings are mainly composed of an outer ring and an inner ring. The inner sphere of the outer ring and the outer sphere of the inner ring form a rolling friction pair.

Product Parameters

Model	d mm	D mm	H mm	W kg
SI5T/K	5	18	36	0.016
SI6T/K	6	20	40	0.571
SI8T/K	8	24	48	0.047
SI10T/K	10	28	57	0.077
SI10-1T/K	10	28	57	0.077
SI12T/K	12	32	66	0.100
SI12-1T/K	12	32	66	0.100
SI14T/K	14	36	75	0.160
SI14-1T/K	14	36	75	0.160
SI16T/K	16	42	85	0.220
SI16-1T/K	16	42	85	0.220
SI18T/K	18	44	93	0.320
SI20T/K	20	50	102	0.420
SI22T/K	22	54	111	0.540
SI25T/K	25	60	124	0.720
SI28T/K	28	66	136	0.820
SI30T/K	30	70	145	1.100
SI30-1T/K	30	70	145	1.100
SI35T/K	35	81	165.5	1.600
SI40T/K	40	91	187.5	2.400
SI50T/K	50	117	218.5	5.000

Detailed Photos

Company Profile

ZheJiang Ponchi New Energy Technology Co., Ltd. is establised in2571, The company is mainly committed to the promotion and sales of world-famous bearing brands.Over the years it has established good cooperative relations with many companies,with a wide range of products lt is used in machinery, mining,steel.electric paper, automobile and other fields.
With reasonable commodity price,fast logistics delivery,high-quality service, and strong technical force, the company has won the support and trustof customers and truly achieved a CZPT situation between the company and customers.
“Customer’s requirement is our pursuit” the company will always adhere to the new concept of people-oriented, customer service, keeping pace with the times, development and innovation”.

Packaging & Shipping

Our Feedback

Certifications

Main Applications of deep groove ball bearing:Automobile: rear-wheel, variator, electric installation part Electric: general-purpose motor, household appliances
Others: meter,internal combustion engine, architecture machinery railway vehicles, transportation andhandling machinery, agriculturalmachinery and machinery of various industries.

FAQ

1. Who are we?
We are based in ZheJiang , China, start from 2019,sell to South America(30.00%),Mid East(25.00%),North
America(20.00%),Africa(15.00%),Southeast Asia(10.00%). There are total about 1000+ people in our office.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
bearing,ball bearing,Roller bearing,Deep groove ball bearing,Tapered roller bearing

4. Why should you buy from us not from other suppliers?
We have more than 20 years of production experience, we have enough inventory to provide you with a full range of bearings, we
have efficient delivery speed, and can provide you with the packaging you need

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element:	Customization
Structure:	Rod End
Material:	Bearing Steel
Load Direction:	Radial Spherical Plain Bearing
Add Lubricant:	Non Self-lubricating
Outer Structure:	Whole Outer Ring

Samples:	US$ 1.76/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

rod end bearing

Differences Between Male and Female Threaded Rod End Bearings

Male and female threaded rod end bearings differ in their design and applications:

Male Threaded Rod End Bearings:

– Male rod end bearings have external threads on the shank or body of the bearing.

– They are typically used in applications where the bearing is mounted to a stationary component, and the threaded shank extends to connect with a mating part (e.g., a linkage or control arm).

– Male rod end bearings allow for easy adjustment or fine-tuning of the connection.

– These bearings are suitable for applications requiring controlled movement or positioning, where the bearing’s external threads facilitate precise adjustments.

Female Threaded Rod End Bearings:

– Female rod end bearings have an internal (female) threaded bore inside the housing.

– They are used when a bolt, stud, or shaft with external threads needs to be connected to the bearing’s housing.

– Female rod end bearings are often employed in applications where the bearing needs to rotate around a fixed shaft or bolt, providing articulation and misalignment capabilities.

– These bearings allow for the attachment of a variety of external components, making them versatile for different applications.

rod end bearing

Maintenance Practices to Extend the Life of Rod End Bearings

Rod end bearings play a crucial role in various mechanical systems, and proper maintenance can significantly extend their lifespan. Here are some specific maintenance practices to consider:

1. Lubrication: Regularly lubricate the rod end bearing according to the manufacturer’s recommendations. Proper lubrication reduces friction, minimizes wear, and prevents corrosion. Use high-quality lubricants suitable for the application’s conditions.

2. Inspection: Perform routine inspections to check for signs of wear, damage, or contamination. Look for play, unusual noises, visible damage, and any other indicators mentioned earlier. Timely detection of issues allows for prompt corrective action.

3. Cleanliness: Keep the surrounding environment clean to prevent contamination. Dust, dirt, and debris can lead to premature wear and damage. Regularly clean the bearing housing and sealing mechanisms.

4. Environmental Protection: In applications exposed to harsh environments, consider protective measures such as seals and shields to prevent contamination and reduce exposure to moisture, dust, or chemicals.

5. Alignment: Ensure proper alignment of rod end bearings within the system. Misalignment can increase stress on the bearing and lead to premature failure. Correct any alignment issues promptly.

6. Avoid Overloading: Be mindful of load capacities and avoid subjecting rod end bearings to excessive loads. Overloading can lead to rapid wear and shortened bearing life. Use bearings with appropriate load ratings for the application.

7. Regular Maintenance Schedule: Establish a maintenance schedule that includes lubrication, inspections, and cleaning. The frequency of maintenance depends on factors like operating conditions, load, and the manufacturer’s recommendations.

8. Replacement of Seals: If your rod end bearings have seals or shields, periodically check their condition. Replace damaged or worn-out seals to maintain effective contamination protection.

9. Storage: When storing spare rod end bearings, ensure they are kept in a clean, dry, and temperature-controlled environment. Use appropriate storage methods to prevent corrosion or damage before installation.

10. Expert Advice: If you’re unsure about maintenance or replacement procedures, consult with the bearing manufacturer or a qualified technician for guidance and assistance.

By following these maintenance practices, you can extend the life of rod end bearings, reduce downtime, and ensure the reliable performance of the systems in which they are used.

rod end bearing

Applications and Industries Using Rod End Bearings

Rod end bearings find application across various industries and serve multiple purposes due to their versatility and design. Common applications and sectors where rod end bearings are used include:

1. Automotive: Rod end bearings are utilized in vehicle suspension systems, steering linkages, and throttle linkages, contributing to precise control and smooth movement.

2. Aerospace: They play a crucial role in aircraft control systems, ensuring reliable and precise movement in critical flight control components.

3. Construction and Heavy Machinery: These bearings are used in heavy equipment like cranes, excavators, and loaders for precise positioning and movement in various parts of the machinery.

4. Manufacturing: In manufacturing machinery, rod end bearings are employed for automation and motion control applications, ensuring accurate and smooth movement in industrial processes.

5. Agricultural Equipment: Farm machinery, such as tractors and combines, use rod end bearings in steering systems, hydraulics, and other mechanical components.

6. Robotics: Rod end bearings are critical in robotic arms and automation systems, facilitating precise movement and control in manufacturing, medical, and other industries.

7. Marine and Offshore: They are used in marine applications, contributing to reliable control and movement in boat steering systems and offshore equipment.

8. Medical Equipment: In medical devices and equipment, rod end bearings ensure precise and smooth movement, making them essential in applications like surgical robots and diagnostic instruments.

9. Racing and Motorsports: Rod end bearings are used in high-performance vehicles for suspension and steering systems, where precise control is paramount.

10. Material Handling: Conveyor systems and material handling equipment benefit from rod end bearings, ensuring efficient movement and transport of goods.

11. Renewable Energy: They play a role in solar tracking systems and wind turbine applications, helping to adjust panel angles and rotor blades for optimal energy capture.

12. Rail and Transportation: In rail systems and transportation equipment, rod end bearings are employed in various components, including doors, brakes, and suspension systems.

13. Sports and Fitness Equipment: In gym equipment and sports machinery, they provide smooth and reliable motion in treadmills, exercise bikes, and more.

Rod end bearings are valued for their ability to provide reliable and precise movement in a wide range of applications, contributing to the efficiency and safety of various industries.

China OEM CZPT Factory Bearing High Performance Si20t/K Rod End Joint Bearing bearing assembly
editor by CX 2024-04-19

China high quality Factory High Quality POS Phs Rod End Bearing Auto Parts Bearings bearing block

Product Description

Features

• Sliding contact surface: steel/PTFE
• Lubricating: Maintenance-free
• Housing: 304 stainless steel
• Inner ring: 420 stainless steel, heat treated HRC54-60
• Outer Ring: 304 stainless steel
• Liner: PTFE

Rod end bearing consist of an eye-shaped head with integral shank forming a housing and astandard spherical plain bearing, or a spherical plain bearing inner ring, or a spherical plainbearing inner ring and a sliding layer between the bore of the head and the inner ring. As a rule.rod ends are available with left or right-hand female or male threads.
Bearings have better load carrying capacity
High-quality materials smooth surface, fee comfortable, corrosionresistance bearings
High quality and High precision
Reasonable price
Low friction, low vibration and low noise, long life

Certificate	ISO, SGS
Material	Gcr15, Stainless steel, etc
Size	5-55mm
Thread	Inside and outside, Left and right
Precision Rating	P0 P6 P5 P4 P2
Use	CNC machinery, Auto, Tractor
OEM Service	Available
Packing	In carton or box or gunny bag then on steel pallet
Production Capacity	500T/month
Sample Time	Within 3 days after confirmation
Delivery Time	30-35days after the formal order or according to your order quantity
Port	HangZhou, ZheJiang , ZheJiang
Shipment	By sea/air, or express(FedEx, UPS, DHL, etc.)
Payment	T/T, L/C
Remark	Special specifications can be made by customer’s requirements
Main Products	Shackles, Turnbuckles, Eye bolts, Chains, Wire rope, Wire rope clip, Wire rope ferrule, Thimble, Pulley, Hook, Quick link, Swivel, Cargo control products, Anchor&anchor chains, etc.

Product application

Our Advantages

Certifications

Packaging & Shipping

FAQ

Q: Where to find Other bearings ?

^{Discover the Homepage—–> Products}

Q: HOW TO CHOOSE A BEARING?

To properly choose a ball bearing, the important thing is to take into account several parameters:

1. Its application

Bearings are everywhere and therefore their applications are varied:

– Agriculture (agricultural machinery, tools, …)
– Domestic (turntable, fishing rod, rollers, …)
– Industry (assembly lines, industrial machinery, …)
– Machines (tools, robots, …)
– Vehicles (cars, motorcycles, bicycles, trailers, …)
– Office (fans, ….)

The application for which the bearing will be used will therefore be decisive in the choice of the part.

2. The speed of rotation

The ball bearing supports high speeds and reduced loads, while the tapered roller bearing supports higher loads but lower speeds.
The speed limits of a bearing are determined by the operating temperature.
The speed limit can be defined as the highest rotational speed a ride can achieve depending on use, without compromising performance and duration.
The speed limit of bearings depends on several factors, such as: bearing type, load size, tolerance class, cage configuration, work set, lubricant, lubrication and cooling conditions, etc.
3. The supported load
– Basic Dynamic Load

This is the maximum permissible load of the bearing capable of providing a nominal service life equal to 1 million revolutions.
It is necessary to calculate the service time necessary to show signs of fatigue on the materials, and on this basis to determine the theoretical duration.

– Static charge

This is the load that applies to the stationary bearing. It corresponds to a contact stress calculated between the rolling body in the most loaded contact and the raceway.
The loads are of simple type and radial, for the radial bearings, of simple type and axial, for
the abutments.
4. Life of bearings

Bearing life is defined as the number of revolutions or hours of operation, which the bearing is CZPT to withstand before signs of fatigue appear on 1 of the rings, on the raceway or on the rolling elements.

5. Nominal fatigue life

The rated fatigue life of an identical bearing or batch of bearings operating under the same service conditions shall be equivalent to at least a 90 degree of reliability.

The average life of a bearing lot is much greater than its nominal duration.

The nominal fatigue life is expressed as L10 (Million revolutions) or L10h (service hour).

6. Bearing tolerance

Bearing tolerances have been standardized both nationally and internationally in accordance with ISO standards.

Bearings are generally manufactured in the P0 tolerance class.

Other parameters can be studied to choose the bearing best adapted to your needs:

– The conditions of use and the constraints
– The requirements of duration of the machine
– The mimics of congestion of the bearing
– Negative factors (vibration, shock, heat, dirt, acceptable sound level, etc.)

The choice of bearing is therefore mainly dictated by the dimension and load characteristics to which the bearing is subjected.

In order to supply even more stable quality to our vast customers, we established a factory in HangZhou city, ZHangZhoug province, China, near HangZhou and ZheJiang port, which has recognized by special ISO. The various bearings we produce there have been inspected and confirmed by SGS to be RoHS compliant.

Besides we has a genuine concern about our customers’ needs and desires, we believe that by establishing a mutually beneficial relationship with our customers we can both continue to grow and prosper, we wish and hope to always grant you satisfaction.

Q: HOW TO MEASURE A BEARING?

You have to change your ball bearing but do not know the model?
There is no written reference to it and you are lost?
You do not have a sliding foot?
The measurement of the bearing will allow you to find this bearing or an equivalent.
GNYARBearing helps you to take accurate measurement.
1st step: the inside diameter of the bearing (called the bore)

A / Put your bearing on the grid as shown in the diagram, taking care to justify the inside edge.
B / Mark the inner contour.
C / For ease of reading, do not hesitate to draw lines to the axes and then take the measure.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element:	Single Row
Structure:	Rod End
Material:	Bearing Steel and Stainless Steel
Load Direction:	Thrust Spherical Plain Bearing
Add Lubricant:	Non Self-lubricating
Outer Structure:	Normal

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

rod end bearing

Selecting Size and Thread Type for Rod End Bearings

When choosing the appropriate size and thread type for a rod end bearing, several considerations are important:

1. Load Requirements: Determine the expected loads the rod end bearing will need to support. Choose a size and material that can handle these loads without deformation or premature wear.

2. Thread Direction: Consider whether you need left-hand or right-hand threads. This depends on the specific application and the direction in which the rod end bearing will be subject to forces or adjustments.

3. Thread Size and Pitch: Select the thread size and pitch that match the mating components or the mounting point. Ensure compatibility to avoid threading issues during installation.

4. Environmental Conditions: Consider the operating environment. If the rod end bearing will be exposed to moisture, chemicals, or extreme temperatures, choose a material and thread type that can withstand these conditions without corrosion or degradation.

5. Lubrication: Evaluate the lubrication method. Some rod end bearings have built-in lubrication features, while others require external lubrication. Ensure that the selected bearing and thread type align with your lubrication approach.

6. Misalignment Requirements: If the application involves misalignment, select a rod end bearing with appropriate articulation capabilities, which may require specific size and thread choices to allow for the necessary movement.

7. Compatibility: Ensure that the rod end bearing’s size and thread type are compatible with the connecting components, such as linkages, control arms, or push/pull rods.

8. Adjustability: In applications where adjustability is required, consider rod end bearings with male and female threads to allow for fine-tuning and alignment.

9. Regulations and Standards: Check if there are industry or safety regulations that dictate specific size or thread requirements for your application.

10. Maintenance: Consider ease of maintenance. Some rod end bearings have features that facilitate inspection and lubrication, which can be essential for extending their lifespan.

11. Cost and Availability: Finally, factor in the cost and availability of the chosen rod end bearing size and thread type. Ensure it fits within your budget and can be readily sourced when needed.

By carefully evaluating these considerations, you can select the most suitable rod end bearing size and thread type for your specific application, ensuring optimal performance and longevity.